SKYLINE INSTRUMENTS CO.,LTD
Skyline Instruments Co.,LTD We only manufacture Lab Testing Equipment
Add to Cart
ASTM D1230 Flammaility Testing Equipment 45 Degree Automatic Flammability Tester
Indroduction
45 Degree is used to evaluate compliance of fire-retardant products with fire-retardant performance standards according to the combustion method, and measures combustion characteristics such as After Glow and After Flame of test specimen installed at a 45-degree angle.
45˚ Flammability tests After Flame Time and After Glow Time of specimen by heat in the chamber.
This measures flame retardance about specimen of less than 5 mm thick (Board, Plate, Sheet, Film and so on) by 45˚ Micro and Airmix method and evaluates materials about 3rd grade of flame retardance (less than 15cm and 5 seconds)
To determine the burning characteristics of textiles under controlled conditions. Stainless steel test cabinet with glass observation panel provided with automatic timing of flame spread in 0.1-second increments from ignition. Brushing Device including Spare Nylon Brush.
Key Specification
| Time Display | 0-99.9S |
| Resolving Capability | 0.1S |
| Ignition time | 1s or set it Set arbitrary |
| Dimensions | 400 x 300 x 500mm (L*W*H) |
| Power | AC 220V / 50Hz / 2A |
| Standards | ASTM D1230, CRF 16-1610 |
| Weight | 45kg |
Standards:
| • KS F 2819 : Testing Method For Incombustibility Of Thin Materials (Testing Method for incombustibility of thin materials for construction) • ASTM D 1230 Canadian Minimum Flammability Standards for most fabrics • NFPA 702 Forced edge ignition of fabrics cited by California for Hospital Apparel and Bedding Fabrics • CA TB 117 (2000) Upholstery Fabrics (Section E) Synthetic Filling (Section C) • BIFMA Upholstery material screening test |
ASTM 45 Degree Flammability Tester.pdf
Brush device